I am hearing a lot about 3D printing

Started by walkstall, February 09, 2013, 04:51:12 PM

Previous topic - Next topic

walkstall

A politician thinks of the next election. A statesman, of the next generation.- James Freeman Clarke

Always remember "Feelings Aren't Facts."

taxed

#PureBlood #TrumpWon

walkstall

Quote from: taxed on February 09, 2013, 05:05:57 PM
Now, that's what I call "ingenuity".

When they start making trillion dollar coins let me know.   :lol:
A politician thinks of the next election. A statesman, of the next generation.- James Freeman Clarke

Always remember "Feelings Aren't Facts."

rich_t

You can get a 3D printer for about $2500.00

walkstall

A politician thinks of the next election. A statesman, of the next generation.- James Freeman Clarke

Always remember "Feelings Aren't Facts."

Mountainshield

I would love to have a 3D printer, mostly to print hobby material. Too bad they are very expensive.

Solar

Quote from: Mountainshield on April 20, 2013, 05:08:36 AM
I would love to have a 3D printer, mostly to print hobby material. Too bad they are very expensive.
Wait a couple of years, unless Govt has anything to say, otherwise, they'll be under a grand in no time, you can already get a hobby type for under a thousand now.
Official Trump Cult Member

#WWG1WGA

Q PATRIOT!!!

walkstall

3-D printing goes from sci-fi fantasy to reality.

more @
http://xfinity.comcast.net/articles/news-science/20130602/US--3-D.Printing.Revolution/

snip~
"We're going to see innovation happening at a much higher rate, introduction of products at a much higher rate," said DeGrange. "We live in an on-demand world now, and we'll see production schedules are going to be greatly compressed."

Airplane mechanics could print a replacement part on the runway. A dishwasher repairman could make a new gasket in his service truck. A surgeon could print a knee implant custom-designed to fit a patient's body.

But the military, D'Aveni said, is likely to be among the first major users of 3-D printers, because of the urgency of warfare.

A politician thinks of the next election. A statesman, of the next generation.- James Freeman Clarke

Always remember "Feelings Aren't Facts."

TboneAgain

Quote from: Solar on April 20, 2013, 02:42:14 PM
Wait a couple of years, unless Govt has anything to say, otherwise, they'll be under a grand in no time, you can already get a hobby type for under a thousand now.

Oh my. Anyone who thinks our never-sleeping, rapacious, all-knowing federal government won't step in and at least TRY to eliminate -- certainly regulate -- technology like this is wearin' jammies. 3-D printing is a game-changer. I've seen a video of somebody firing a pistol that was created completely with a 3-D printer, and needed only a simple bit of steel for a firing pin. Do you think BATFE will look the other way on this?

In a way, I look forward to the battle, because it's going to intensify the fire that's been lit under America by the IRS boondoggle. BIG BROTHER is watching you, and is after you, and will ruin your life. The new battleground for government control freaks is software.
The powers not delegated to the United States by the Constitution, nor prohibited by it to the States, are reserved to the States respectively, or to the people. -- Tenth Amendment to the US Constitution

Government is not reason; it is not eloquent; IT IS FORCE. -- George Washington

walkstall

Quote from: mrclose on June 08, 2013, 10:13:02 PM
I'll settle for some dentures! :lol:


:woot:   Talk about cutting out the middleman.   :lol:
A politician thinks of the next election. A statesman, of the next generation.- James Freeman Clarke

Always remember "Feelings Aren't Facts."

quiller

Staples will begin carrying 3D printers, and Amazon has a whole section devoted to 3D printer related items. Here's the general wrap-up....

http://www.zdnet.com/amazon-launches-online-store-for-3d-printers-7000016803/

And of course I'm reminded of the film Weird Science when news of X-rated 3-D printed items gets mentioned....and it is. Take the production of vibrators, and the receiving-units designed to test them.....

http://www.smartplanet.com/blog/bulletin/3d-printing-is-innovating-adult-toy-industry/13437

As any Star Trek fanboy knows, Data didn't HAVE to be a boy.......

Become to the brave new world of replicators.

walkstall

Leading 3-D printer firms to merge in $403M deal

snip~
MINNEAPOLIS (AP) — Stratasys, a leading maker of 3-D printers, is buying another 3-D printer manufacturer, MakerBot, for $403 million in stock.

Stratasys Ltd. said Wednesday the acquisition will enable it to offer affordable desktop 3-D printers. MakerBot, whose machines are priced around $2,000 to $3,000 and are aimed at the "prosumer" market, sells direct to buyers over its website. In contrast, Stratasys makes machines priced $10,000 to $600,000 mostly to industrial clients through resellers.

more @
http://xfinity.comcast.net/articles/news-technology/20130620/US--3-D.Printer-Merger/

A politician thinks of the next election. A statesman, of the next generation.- James Freeman Clarke

Always remember "Feelings Aren't Facts."

daidalos

Quote from: Mountainshield on April 20, 2013, 05:08:36 AM
I would love to have a 3D printer, mostly to print hobby material. Too bad they are very expensive.

I agree I would love to 3D print some of my digital artwork.

Voila go from digital artist to sculptor! lol
One of every five Americans you meet has a mental illness of some sort. Many, many, of our veteran's suffer from mental illness like PTSD now also. Help if ya can. :) http://www.projectsemicolon.org/share-your-story.html
And no you won't find my "story" there. They don't allow science fiction. :)